Lincoln Aviator: Adaptive Cruise Control / Overriding the Set Speed
WARNING: If you override the system
by pressing the accelerator pedal, it does
not automatically apply the brakes to
maintain a gap from any vehicle ahead.
When you press the accelerator pedal, you
override the set speed and gap distance.
Use the accelerator pedal to intentionally
exceed the set speed limit.
When you override the system, the green
indicator illuminates and the vehicle icon
does not appear in the instrument cluster
display.
The system resumes operation when you
release the accelerator pedal. The vehicle
speed decreases to the set speed, or a lower
speed if following a slower vehicle.
Canceling the Set Speed
Press the button or tap the
brake
pedal.
The set speed does not erase.
Resuming the Set Speed
Press the button.
Your vehicle speed returns to the previously
set speed and gap setting...
Illuminates when you switch lane
centering on. The color of the
indicator changes to indicate the
system status.
Gray indicates the system is on but inactive...
Other information:
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Diagnostic Trouble Code Chart
Module
DTC
Description
Action
DCDC
P0A94:4B
DC/DC Converter "A" Performance: Over Temperature
GO to Pinpoint Test C
DCDC
P0D32:00
DC/DC Converter Over Temperature: No Sub Type Information
GO to Pinpoint Test C
DCDC
P0E56:00
DC/DC Converter Input Voltage Too Low: No Sub Type Information
GO to Pinpoint Test D
DCDC
P0E56:13
DC/DC Converter Input Voltage Too Low: Circuit Open
GO to Pinpoint Test D
DCDC
P0E57:00
DC/DC Converter Input Voltage Too High: No Sub Type Information
GO to Pinpoint Test E
DCDC
U0100:00
Lost Communication With ECM/PCM "A": No Sub Type Information
GO to Pinpoint Test I
DCDC
U0111:00
Lost Communication With Battery Energy Control Module "A": No Sub Type Information
GO to Pinpoint Test J
DCDC
U0412:00
Invalid Data Received From Battery Energy Control Module "A": No Sub Type Information
GO to Pinpoint Test K
DCDC
U3000:04
Control Module: System Internal Failures
GO to Pinpoint Test L
DCDC
U3000:41
Control Module: General Checksum Failure
GO to Pinpoint Test M
DCDC
U3000:42
Control Module: General Memory Failure
GO to Pinpoint Test M
DCDC
U3000:45
Control Module: Program Memory Failure
GO to Pinpoint Test M
DCDC
U3000:49
Control Module: Internal Electronic Failure
GO to Pinpoint Test M
DCDC
U3000:96
Control Module: Component Internal Failure
GO to Pinpoint Test N
DCDC
U3003:16
Battery Voltage: Circuit Voltage Below Threshold
GO to Pinpoint Test F
DCDC
U3003:17
Battery Voltage: Circuit Voltage Above Threshold
GO to Pinpoint Test G
DCDC
U3003:62
Battery Voltage: Signal Compare Failure
GO to Pinpoint Test H
Global Customer Symptom Code (GCSC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices...
Removal
WARNING:
Vent all air pressure from the air suspension system prior
to disconnecting or removing any air suspension components. It is
dangerous to remove air suspension components while under pressure.
Failure to follow this instruction may result in serious personal
injury...