Lincoln Aviator: Phone as a Key / Phone as a Key – Troubleshooting
Phone as a Key – Frequently Asked Questions
How can I tell if my vehicle has Phone as a
Key?
The touchscreen shows the Phone as a
Key reset option if your vehicle has
Phone as a Key. If you have registered
your vehicle through the Lincoln Way
app, a control button appears on the
home screen of the Lincoln Way app.
What happens if I cannot unlock the vehicle
with Phone as a Key?
Attempt to move your phone closer to
the vehicle. Check that the Lincoln Way
app is still running and that the Phone
as a Key control screen shows
connected. If the phone is connected,
attempt to press the remote unlock
button in the Lincoln Way app. If the
phone is not connected or the remote
unlock button does not work in the
Lincoln Way app, attempt to force close
and restart the app.
Why do I get a No Key Detected message
in the instrument cluster display when I am
using Phone as a Key and my phone is in
the car?
Your phone’s Bluetooth connection has
been disrupted or is not connected. Try
reconnecting your phone's Bluetooth
connection. Move the phone closer to
the center of the vehicle near the cup
holder or center console. Verify your
Phone as a Key is still active, enabled
and has not been revoked.
What do I do if my phone is lost, damaged,
or the battery has depleted?
Use the Backup Start Passcode that you
created to protect you in the event that
you lose your phone, damage it, or the
battery depletes.
How many phones can I use for Phone as
a Key?
You can program and activate up to four
phones with Phone as a Key to your
vehicle.
How does a valet drive my car if I only use
my Phone as a Key?
Have the valet use the temporary valet
passcode that you created when using
valet mode.
I uninstalled my Lincoln Way app and
reinstalled it. Why am I not able to get a
new Phone as a Key?
Remove the Phone as a Key that was
previously associated with your phone
or reset Phone as a Key from your
vehicle, and then request a new Phone
as a Key.
Why can I not remotely start the vehicle
with my Phone as a Key?
Using the Lincoln Way app, verify your
Phone as a Key setup is complete and
enabled via Bluetooth connection on at
least one phone. If Bluetooth has
connected but Phone as a Key setup is
not complete, complete the setup of
your Phone as a Key, as prompted from
the Lincoln Way app.
Using the Valet Mode
Press Settings on the touchscreen.
Press Valet Mode.Note: Have your Backup Start Passcode
completely setup before using Valet Mode...
Other information:
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices.REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Diagnostic Trouble Code Chart
Module
DTC
Description
Action
PCM
P008A:00
Low Pressure Fuel System Pressure - Too Low: No Sub Type Information
GO to Pinpoint Test HC
PCM
P008B:00
Low Pressure Fuel System Pressure - Too High: No Sub Type Information
GO to Pinpoint Test HC
PCM
P00BA:00
Low Fuel Pressure - Forced Limited Power: No Sub Type Information
GO to Pinpoint Test HC
PCM
P00BB:00
Fuel Injector Insufficient Flow - Forced Limited Power: No Sub Type Information
GO to Pinpoint Test HC
PCM
P0148:00
Fuel Delivery Error: No Sub Type Information
GO to Pinpoint Test HC
PCM
P0230:00
Fuel Pump Primary Circuit: No Sub Type Information
GO to Pinpoint Test KC
PCM
P0231:00
Fuel Pump Secondary Circuit Low: No Sub Type Information
GO to Pinpoint Test KC
PCM
P0232:00
Fuel Pump Secondary Circuit High: No Sub Type Information
GO to Pinpoint Test KC
PCM
P025A:00
Fuel Pump Module A Control Circuit/Open: No Sub Type Information
GO to Pinpoint Test KC
PCM
P025B:00
Fuel Pump Module A Control Circuit Range/Performance: No Sub Type Information
GO to Pinpoint Test KC
PCM
P025C:00
Fuel Pump Module A Control Circuit Low: No Sub Type Information
GO to Pinpoint Test KC
PCM
P025D:00
Fuel Pump Module A Control Circuit High: No Sub Type Information
GO to Pinpoint Test KC
PCM
P027B:00
Fuel Pump Module B Control Circuit Range/Performance: No Sub Type Information
GO to Pinpoint Test KC
PCM
P0627:00
Fuel Pump A Control Circuit/Open: No Sub Type Information
GO to Pinpoint Test KC
PCM
P064A:00
Fuel Pump Control Module A: No Sub Type Information
GO to Pinpoint Test KC
PCM
P166A:00
Restraints Deployment Communication Circuit: No Sub Type Information
GO to Pinpoint Test KC
PCM
P2632:00
Fuel Pump B Control Circuit/Open: No Sub Type Information
GO to Pinpoint Test KC
PCM
P26EA:00
Fuel Pump Control Module B: No Sub Type Information
GO to Pinpoint Test KC
PCM
U0109:00
Lost Communication With Fuel Pump Control Module A: No Sub Type Information
GO to Pinpoint Test KC
PCM
U016C:00
Lost Communication With Fuel Pump Control Module B: No Sub Type Information
GO to Pinpoint Test KC
PCM
U210B:00
Lost Communication Between Fuel Pump Control
Module A And Restraints Control Module: No Sub Type Information
GO to Pinpoint Test KC
Global Customer Symptom Code (GCSC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices...
Replace the filter at regular intervals.
The cabin air filter is behind the glove
compartment.
To remove the lower glove compartment and
access the filter:
Open the glove compartment.
Press the tab on each side.
Fully lower the glove compartment...