Lincoln Aviator: Engine - 3.0L EcoBoost / Removal and Installation - Timing Chain Tensioner
Removal and Installation
-
To ensure correct timing of the engine, follow the
Timing Chain procedure to service the timing chain tensioners.
Refer to: Timing Chain (303-01A Engine - 3.0L EcoBoost, Removal and Installation).
Special Tool(s) /
General Equipment
Flat-Bladed Screwdriver
Vise
Vise Jaw Protectors
Removal
RH and LH timing chains
NOTICE:
During engine repair procedures, cleanliness is
extremely important...
Special Tool(s) /
General Equipment
Plastic Scraper
Materials
Name
Specification
Motorcraft® High Performance Engine RTV SiliconeTA-357
WSE-M4G323-A6
Motorcraft® Silicone Gasket RemoverZC-30-A
-
Motorcraft® Metal Surface Prep WipesZC-31-B
-
Motorcraft® Metal Brake Parts CleanerPM-4-A, PM-4-B
-
Removal
NOTICE:
During engine repair procedures, cleanliness is extremely
important...
Other information:
Special Tool(s) /
General Equipment
Resistance Spotwelding Equipment
Spot Weld Drill Bit
Locking Pliers
Removal
NOTE:
Vehicles equipped with a roof opening panel will use the rear most reinforcement only.
WARNING:
Before beginning any service procedure in this
manual, refer to health and safety warnings in section 100-00 General
Information...
Check
NOTE:
Perform the following pre-checks to make sure module programming completes without errors.
Start the programming session in KOEO.
Make sure the vehicle battery is fully charged or is
connected to a battery charger. The battery state of charge should be
12...