Lincoln Aviator: Starting a Hybrid Electric Vehicle System / Switching Off Your Vehicle When It Is Moving
WARNING: Switching off the engine
when your vehicle is still moving results in
a significant decrease in braking
assistance. Higher effort is required to
apply the brakes and to stop your vehicle.
A significant decrease in steering
assistance could also occur. The steering
does not lock, but higher effort could be
required to steer your vehicle. When you
switch the ignition off, some electrical
circuits, for example airbags, also turn off.
If you unintentionally switch the ignition
off, shift into neutral (N) and restart the
engine.
- Put the transmission in neutral (N) and
use the brakes to bring your vehicle to a
safe stop.
- When your vehicle has stopped, put the
transmission in park (P).
- Press and hold the push button ignition
switch for one second, or press it three
times within two seconds.
- Apply the parking brake.
Vehicles Using Phone as a Key
- Shift into neutral (N) and use the brakes
to bring your vehicle to a safe stop.
- When your vehicle stops, shift into park
(P).
- Press and hold the push button ignition
switch, or press it three times within two
seconds.
- Apply the parking brake.
Put the transmission in park (P).
Press the push button ignition switch
once.
Apply the parking brake.
Note: This switches off the ignition, warning
lamps and indicators...
Guarding Against Exhaust Fumes
WARNING: Exhaust leaks may result
in entry of harmful and potentially lethal
fumes into the passenger compartment. If
you smell exhaust fumes inside your
vehicle, have your vehicle inspected
immediately...
Other information:
Overview
The 3.0L Gasoline Turbocharged Direct Injection (GTDI) (4V) is a V-6 engine with the following features:
Interference design engine
Dual overhead camshafts
Four valves per cylinder
Gasoline Turbocharged Direct Injection (GTDI)
Composite intake manifold
Aluminum cylinder heads
Compacted graphite iron cylinder block
Twin independent variable cam timing (Ti-VCT)
An electronic ignition system with 6 ignition coils
Continuous variable displacement oil pump
Engine Identification
For quick identification, refer to the safety certification decal...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Lower the headliner.
Refer to: Headliner - Lowering (501-05 Interior Trim and Ornamentation, Removal and Installation).
Remove the rear temperature sensor...
Categories
The front outboard and rear safety restraints
in the vehicle are combination lap and
shoulder belts.
Insert the belt tongue into the proper
buckle (the buckle closest to the direction
the tongue is coming from) until you hear
a snap and feel it latch. Make sure that
you securely fasten the tongue in the
buckle.

To unfasten, press the release button
and remove the tongue from the buckle.
read more