Lincoln Aviator: Fuel Charging and Controls - 3.0L EcoBoost/3.0L EcoBoost – Hybrid (BQ) / Description and Operation - Fuel Charging and Controls - Component Location
3.0L EcoBoost
| Item |
Description |
| 1 |
Throttle body |
| 2 |
High-pressure fuel pump |
| 3 |
High-pressure fuel pump drive unit |
| 4 |
Direct injection fuel rail |
| 5 |
Direct injection fuel injector |
Fuel Pump Driver Module
| Item |
Description |
| 1 |
Fuel pump driver module |
System Operation
Air Fuel Ratio Imbalance Monitor
The air fuel ratio imbalance monitor is an on board diagnostic strategy designed to monitor the air fuel ratio...
Other information:
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Diagnostic Trouble Code Chart
Module
DTC
Description
Action
PCM
P0544:00
Exhaust Gas Temperature Sensor Circuit (Bank 1 Sensor 1): No Sub Type Information
GO to Pinpoint Test RB
PCM
P0545:00
Exhaust Gas Temperature Sensor Circuit Low (Bank 1 Sensor 1): No Sub Type Information
GO to Pinpoint Test RB
PCM
P0546:00
Exhaust Gas Temperature Sensor Circuit High (Bank 1 Sensor 1): No Sub Type Information
GO to Pinpoint Test RB
PCM
P0547:00
Exhaust Gas Temperature Sensor Circuit (Bank 2 Sensor 1): No Sub Type Information
GO to Pinpoint Test RB
PCM
P0548:00
Exhaust Gas Temperature Sensor Circuit Low (Bank 2 Sensor 1): No Sub Type Information
GO to Pinpoint Test RB
PCM
P0549:00
Exhaust Gas Temperature Sensor Circuit High (Bank 2 Sensor 1): No Sub Type Information
GO to Pinpoint Test RB
Global Customer Symptom Code (GCSC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices...
WARNING:
Service of the high voltage system on this vehicle is
restricted to qualified personnel. The required qualifications vary by
region. Always observe local laws and legislative directives regarding
electric vehicle service. Failure to follow this instruction may result
in serious personal injury or death...
Categories
The front outboard and rear safety restraints
in the vehicle are combination lap and
shoulder belts.
Insert the belt tongue into the proper
buckle (the buckle closest to the direction
the tongue is coming from) until you hear
a snap and feel it latch. Make sure that
you securely fasten the tongue in the
buckle.

To unfasten, press the release button
and remove the tongue from the buckle.
read more