Lincoln Aviator: Customer Assistance / Fuse Specification Chart
WARNING: Always disconnect the
battery before servicing high current fuses.
WARNING: To reduce risk of
electrical shock, always replace the cover
to the power distribution box before
reconnecting the battery or refilling fluid
reservoirs...
Other information:
System Operation
System Diagram - Heated/Ventilated Seats
Item
Description
1
RACM
2
MS-CAN
3
SCMF
4
LH Rear Seat
5
Cushion Temp Sensor
6
RH Rear Seat
7
Backrest Heater Mat
8
Cushion Heater Mat
9
Cushion and Backrest Blower Motors
10
Backrest Heater Mat
11
Cushion Heater Mat
12
Cushion Temp Sensor
13
Cushion and Backrest Blower Motors
14
HS-CAN3
15
GWM
Network Message Chart - Heated/Ventilated Seats
SCMF (rear seat climate control module) Network Input Messages
Broadcast Message
Originating Module
Message Purpose
Seat control requests
RACM control module
Contains the heated/ventilated seat request information...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the cooling module.
Refer to: Cooling Module (303-03A Engine Cooling - 3.0L EcoBoost, Removal and Installation).
Remove the bolt, release the tabs and remove the A/C condenser...
Categories
Each door has a backup power system which
allows the door to function if your vehicle
has no power. The system has a limited
number of operations before the power is
depleted and turns off. When the system
turns off, the door remains open and
unlatched and does not close.
If your vehicle has no power and the backup
power system is turned off, you can close
and secure your vehicle by manually
resetting each door latch using a key in the
position shown.
read more