Lincoln Aviator 2020-2026 Service Manual / Chassis / Brake System / Brake System - General Information / General Procedures - Brake System Pressure Bleeding

Lincoln Aviator: Brake System - General Information / General Procedures - Brake System Pressure Bleeding

Bleeding

  1. Carry out the brake system pressure bleeding using the diagnostic scan tool following the on-screen instructions.

    General Procedures - Brake System Draining and Filling

    D..

    Front Disc Brake

    ..

    Other information:

    Lincoln Aviator 2020-2026 Service Manual: Removal and Installation - Roof Mounted Antenna


    Removal Lower the headliner. Refer to: Headliner - Lowering (501-05 Interior Trim and Ornamentation, Removal and Installation). Disconnect the antenna cable connector(s). Remove the bolt, the bracket and the roof mounted antenna...

    Lincoln Aviator 2020-2026 Service Manual: Diagnosis and Testing - Body Control Module C (BCMC)


    Diagnostic Trouble Code (DTC) Chart Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).   Diagnostic Trouble Code Chart Module   DTC Description Action   BCMC U0100:87 Lost Communication With ECM/PCM "A": Missing Message   GO to Pinpoint Test A   BCMC U0111:87 Lost Communication With Battery Energy Control Module "A": Missing Message   GO to Pinpoint Test B   BCMC U0140:87 Lost Communication With Body Control Module: Missing Message   GO to Pinpoint Test C   BCMC U0164:87 Lost Communication With HVAC Control Module: Missing Message   GO to Pinpoint Test D   BCMC U024D:87 Lost Communication With "Seat Control Module J": Missing Message   GO to Pinpoint Test E   BCMC U0293:87 Lost Communication With Hybrid/EV Powertrain Control Module: Missing Message   GO to Pinpoint Test F   BCMC U1000:00 Solid State Driver Protection Active: Driver Disabled: No Sub Type Information   GO to Pinpoint Test G   BCMC U2100:00 Initial Configuration Not Complete: No Sub Type Information   GO to Pinpoint Test H   BCMC U2200:00 Control Module Configuration Memory Corrupt: No Sub Type Information   GO to Pinpoint Test H   BCMC U3000:49 Control Module: Internal Electronic Failure   GO to Pinpoint Test I   BCMC U3003:16 Battery Voltage: Circuit Voltage Below Threshold   GO to Pinpoint Test J   BCMC U3003:17 Battery Voltage: Circuit Voltage Above Threshold   GO to Pinpoint Test K Pinpoint Tests PINPOINT TEST A : U0100:87 Refer to Wiring Diagrams Cell 14 for schematic and connector information...

    Categories

    Emergency Locking

    Each door has a backup power system which allows the door to function if your vehicle has no power. The system has a limited number of operations before the power is depleted and turns off. When the system turns off, the door remains open and unlatched and does not close.

    If your vehicle has no power and the backup power system is turned off, you can close and secure your vehicle by manually resetting each door latch using a key in the position shown.

    read more

     
    Copyright © 2026 www.liaviator2.com