Lincoln Aviator: Windows and Mirrors / Global Opening and Closing

You can use the remote control to open the windows with the ignition off.

Note: You can enable or disable this feature in the information display or see an authorized dealer.

Note: To operate this feature, accessory delay must not be active.

Opening the Windows

You can only open the windows for a short time after you unlock your vehicle with the remote control. After you unlock your vehicle, press and hold the remote control unlock button to open the windows. Release the button once movement starts. Press the lock or unlock button to stop movement.

Closing the Windows

WARNING: When closing the power windows, verify they are free of obstruction and make sure that children and pets are not in the proximity of the window openings.

To close the windows, press and hold the remote control lock button. Release the button once movement starts. Press the lock or unlock button to stop movement.

    Power Windows

    WARNING: Do not leave children unattended in your vehicle and do not let them play with the power windows. Failure to follow this instruction could result in personal injury...

    Exterior Mirrors

    Power Exterior Mirrors WARNING: Do not adjust the mirrors when your vehicle is moving. This could result in the loss of control of your vehicle, serious personal injury or death...

    Other information:

    Lincoln Aviator 2020-2025 Owners Manual: Vehicle Identification


    Install any devices that use radio frequency identification, for example, toll readers or vehicle identification cards, to the specified area on the windshield. Note: Follow the manufacturer’s installation instructions. Note: When installing the radio frequency identification device, do not block objects such as the rain sensor and the auto-dimming sensor...

    Lincoln Aviator 2020-2025 Service Manual: Diagnosis and Testing - Headlamps


    Diagnostic Trouble Code (DTC) Chart Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).   Diagnostic Trouble Code Chart Module   DTC Description Action   BCM B14E0:11 Exterior Lamps Power Supply "C": Circuit Short to Ground   GO to Pinpoint Test A   BCM B14E0:15 Exterior Lamps Power Supply "C": Circuit Short to Battery or Open   GO to Pinpoint Test A   BCM B14E1:11 Exterior Lamps Power Supply "D": Circuit Short to Ground   GO to Pinpoint Test A   BCM B14E1:15 Exterior Lamps Power Supply "D": Circuit Short to Battery or Open   GO to Pinpoint Test A   BCM B14E2:11 Exterior Lamps Power Supply "E": Circuit Short to Ground   GO to Pinpoint Test B   BCM B14E2:15 Exterior Lamps Power Supply "E": Circuit Short to Battery or Open   GO to Pinpoint Test B   BCM B14E3:11 Exterior Lamps Power Supply "F": Circuit Short to Ground   GO to Pinpoint Test B   BCM B14E3:15 Exterior Lamps Power Supply "F": Circuit Short to Battery or Open   GO to Pinpoint Test B   BCM B14E5:01 Left Front Enhanced Exterior Lighting System: General Electrical Failure   GO to Pinpoint Test S   BCM B14E5:08 Left Front Enhanced Exterior Lighting System: Bus Signal / Message Failure   GO to Pinpoint Test S   BCM B14E5:49 Left Front Enhanced Exterior Lighting System: Internal Electronic Failure   GO to Pinpoint Test S   BCM B14E5:55 Left Front Enhanced Exterior Lighting System: Not Configured   GO to Pinpoint Test S   BCM B14E7:01 Right Front Enhanced Exterior Lighting System: General Electrical Failure   GO to Pinpoint Test S   BCM B14E7:08 Right Front Enhanced Exterior Lighting System: Bus Signal / Message Failure   GO to Pinpoint Test S   BCM B14E7:49 Right Front Enhanced Exterior Lighting System: Internal Electronic Failure   GO to Pinpoint Test S   BCM B14E7:55 Right Front Enhanced Exterior Lighting System: Not Configured   GO to Pinpoint Test S   BCM B1533:02 Headlamp Switch Module: General Signal Failure   GO to Pinpoint Test A   BCM B1533:08 Headlamp Switch Module: Bus Signal / Message   GO to Pinpoint Test A   BCM B1533:49 Headlamp Switch Module: Internal Electronic Failure   GO to Pinpoint Test A   BCM B1533:56 Headlamp Switch Module: Invalid / Incompatible Configuration   GO to Pinpoint Test A   BCM B1D00:11 Left Low Beam: Circuit Short To Ground   GO to Pinpoint Test A   BCM B1D00:15 Left Low Beam: Circuit Short To Battery Or Open   GO to Pinpoint Test A   BCM B1D01:11 Right Low Beam: Circuit Short To Ground   GO to Pinpoint Test A   BCM B1D01:15 Right Low Beam: Circuit Short To Battery Or Open   GO to Pinpoint Test A   BCM B1D02:11 Left High Beam Circuit: Circuit Short To Ground   GO to Pinpoint Test B   BCM B1D02:15 Left High Beam Circuit: Circuit Short To Battery Or Open   GO to Pinpoint Test B   BCM B1D03:11 Right High Beam Circuit: Circuit Short To Ground   GO to Pinpoint Test B   BCM B1D03:15 Right High Beam Circuit: Circuit Short To Battery Or Open   GO to Pinpoint Test B   HCM B1041:04 Levelling Control: System Internal Failure   GO to Pinpoint Test H   HCM B1041:54 Levelling Control: Missing Calibration   GO to Pinpoint Test H   HCM B1087:83 LIN Bus "A": Value of Signal Protection Calculation Incorrect   GO to Pinpoint Test F   HCM B1087:83 LIN Bus "A": Value of Signal Protection Calculation Incorrect   GO to Pinpoint Test G   HCM B1087:86 LIN Bus "A": Signal Invalid   GO to Pinpoint Test F   HCM B1087:86 LIN Bus "A": Signal Invalid   GO to Pinpoint Test G   HCM B1088:83 LIN Bus "B": Value of Signal Protection Calculation Incorrect   GO to Pinpoint Test F   HCM B1088:83 LIN Bus "B": Value of Signal Protection Calculation Incorrect   GO to Pinpoint Test G   HCM B1088:86 LIN Bus "B": Signal Invalid   GO to Pinpoint Test F   HCM B1088:86 LIN Bus "B": Signal Invalid   GO to Pinpoint Test G   HCM B1437:01 Left Levelling Actuator: General Electrical Failure   GO to Pinpoint Test I   HCM B1437:87 Left Levelling Actuator: Missing Message   GO to Pinpoint Test F   HCM B1437:87 Left Levelling Actuator: Missing Message   GO to Pinpoint Test G   HCM B1439:01 Right Levelling Actuator: General Electrical Failure   GO to Pinpoint Test I   HCM B1439:87 Right Levelling Actuator: Missing Message   GO to Pinpoint Test F   HCM B1439:87 Right Levelling Actuator: Missing Message   GO to Pinpoint Test G   HCM B14D9:01 Left Headlamp Light Distribution Actuator: General Electrical Failure   GO to Pinpoint Test I   HCM B14D9:64 Left Headlamp Light Distribution Actuator: Signal Plausibility Failure   GO to Pinpoint Test I   HCM B14D9:87 Left Headlamp Light Distribution Actuator: Missing Message   GO to Pinpoint Test F   HCM B14D9:87 Left Headlamp Light Distribution Actuator: Missing Message   GO to Pinpoint Test G   HCM B14DA:01 Right Headlamp Light Distribution Actuator: General Electrical Failure   GO to Pinpoint Test I   HCM B14DA:64 Right Headlamp Light Distribution Actuator: Signal Plausibility Failure   GO to Pinpoint Test I   HCM B14DA:87 Right Headlamp Light Distribution Actuator: Missing Message   GO to Pinpoint Test F   HCM B14DA:87 Right Headlamp Light Distribution Actuator: Missing Message   GO to Pinpoint Test G   HCM B14DB:01 Left Headlamp Driver Control System: General Electrical Failure   GO to Pinpoint Test I   HCM B14DB:54 Left Headlamp Driver Control System: Missing Calibration   GO to Pinpoint Test I   HCM B14DB:55 Left Headlamp Driver Control System: Not Configured   GO to Pinpoint Test I   HCM B14DB:87 Left Headlamp Driver Control System: Missing Message   GO to Pinpoint Test F   HCM B14DB:87 Left Headlamp Driver Control System: Missing Message   GO to Pinpoint Test G   HCM B14DC:01 Right Headlamp Driver Control System: General Electrical Failure   GO to Pinpoint Test I   HCM B14DC:54 Right Headlamp Driver Control System: Missing Calibration   GO to Pinpoint Test I   HCM B14DC:55 Right Headlamp Driver Control System: Not Configured   GO to Pinpoint Test I   HCM B14DC:87 Right Headlamp Driver Control System: Missing Message   GO to Pinpoint Test F   HCM B14DC:87 Right Headlamp Driver Control System: Missing Message   GO to Pinpoint Test G   HCM B1559:96 Left Headlamp: Component Internal Failure   GO to Pinpoint Test I   HCM B155A:96 Right Headlamp: Component Internal Failure   GO to Pinpoint Test I   HCM B15A6:01 Right Matrix Controller Actuator: General Electrical Failure   GO to Pinpoint Test I   HCM B15A6:87 Right Matrix Controller Actuator: Missing Message   GO to Pinpoint Test F   HCM B15A6:87 Right Matrix Controller Actuator: Missing Message   GO to Pinpoint Test G   HCM B15A7:01 Left Matrix Controller Actuator: General Electrical Failure   GO to Pinpoint Test I   HCM B15A7:87 Left Matrix Controller Actuator: Missing Message   GO to Pinpoint Test F   HCM B15A7:87 Left Matrix Controller Actuator: Missing Message   GO to Pinpoint Test G   HCM B1A59:1C Sensor 5 Volt Supply: Circuit Voltage Out of Range   GO to Pinpoint Test H   HCM B1D64:01 Left Headlamp Swiveling Motor: General Electrical Failure   GO to Pinpoint Test I   HCM B1D64:87 Left Headlamp Swiveling Motor: Missing Message   GO to Pinpoint Test F   HCM B1D64:87 Left Headlamp Swiveling Motor: Missing Message   GO to Pinpoint Test G   HCM B1D65:01 Right Headlamp Swiveling Motor: General Electrical Failure   GO to Pinpoint Test I   HCM B1D65:87 Right Headlamp Swiveling Motor: Missing Message   GO to Pinpoint Test F   HCM B1D65:87 Right Headlamp Swiveling Motor: Missing Message   GO to Pinpoint Test G   HCM B1D68:64 Left Headlamp Swiveling Feedback Sensor: Signal Plausibility Failure   GO to Pinpoint Test I   HCM B1D69:64 Right Headlamp Swiveling Feedback Sensor: Signal Plausibility Failure   GO to Pinpoint Test I   HCM C1A03:12 Left Front Height Sensor: Circuit Short To Battery   GO to Pinpoint Test H   HCM C1A03:14 Left Front Height Sensor: Circuit Short To Ground or Open   GO to Pinpoint Test H   HCM C1A03:29 Left Front Height Sensor: Signal Invalid   GO to Pinpoint Test H   HCM C1A03:64 Left Front Height Sensor: Signal Plausibility Failure   GO to Pinpoint Test H   HCM C1A05:12 Left Rear Height Sensor: Circuit Short To Battery   GO to Pinpoint Test H   HCM C1A05:14 Left Rear Height Sensor: Circuit Short To Ground or Open   GO to Pinpoint Test H   HCM C1A05:29 Left Rear Height Sensor: Signal Invalid   GO to Pinpoint Test H   HCM C1A05:64 Left Rear Height Sensor: Signal Plausibility Failure   GO to Pinpoint Test H   HCM U0121:00 Lost Communication With Anti-Lock Brake System (ABS) Control Module: No Sub Type Information   GO to Pinpoint Test J   HCM U0146:00 Lost Communication With Serial Data Gateway "A": No Sub Type Information   GO to Pinpoint Test K   HCM U0151:00 Lost Communication With Restraints Control Module: No Sub Type Information   GO to Pinpoint Test M   HCM U0212:00 Lost Communication With Steering Column Control Module: No Sub Type Information   GO to Pinpoint Test L   HCM U023A:00 Lost Communication With Image Processing Module A: No Sub Type Information   GO to Pinpoint Test N   HCM U0415:00 Invalid Data Received From Anti-Lock Brake System (ABS) Control Module: No Sub Type Information   GO to Pinpoint Test P   HCM U0429:00 Invalid Data received from Steering Column Control Module: No Sub Type Information   GO to Pinpoint Test P   HCM U0447:00 Invalid Data Received From Serial Data Gateway "A": No Sub Type Information   GO to Pinpoint Test P   HCM U0452:00 Invalid Data Received From Restraints Control Module: No Sub Type Information   GO to Pinpoint Test P   HCM U053B:00 Invalid Data Received From Image Processing Module A: No Sub Type Information   GO to Pinpoint Test P   HCM U2024:51 Control Module Cal-Config Data: Not Programmed   GO to Pinpoint Test O   HCM U2024:57 Control Module Cal-Config Data: Invalid / Incompatible Software Component   GO to Pinpoint Test O   HCM U2100:00 Initial Configuration Not Complete: No Sub Type Information   GO to Pinpoint Test O   HCM U2101:00 Control Module Configuration Incompatible: No Sub Type Information   GO to Pinpoint Test O   HCM U2101:56 Control Module Configuration Incompatible: Invalid / Incompatible Configuration   GO to Pinpoint Test O   HCM U2101:86 Control Module Configuration Incompatible: Signal Invalid   GO to Pinpoint Test O   HCM U2200:45 Control Module Configuration Memory Corrupt: Program Memory Failure   GO to Pinpoint Test O   HCM U3000:45 Control Module: Program Memory Failure   GO to Pinpoint Test O   HCM U3000:46 Control Module: Calibration / Parameter Memory Failure   GO to Pinpoint Test O   HCM U3003:16 Battery Voltage: Circuit Voltage Below Threshold   GO to Pinpoint Test Q   HCM U3003:17 Battery Voltage: Circuit Voltage Above Threshold   GO to Pinpoint Test R   SCCM B124C:96 Turn Indicator Stalk Switch Pack: Component Internal Failure   GO to Pinpoint Test E   SCCM B124C:9E Turn Indicator Stalk Switch Pack: Stuck On   GO to Pinpoint Test E Symptom Chart Symptom Chart: Headlamps Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices...

    Categories

    Activating Intelligent Access

    The intelligent access key must be within 3 ft (1 m) of the door or luggage compartment you intend to lock or unlock.

    At a Door

    Electronic door handles are on each door. Gently depress the switch inside the exterior door handle to unlock and open the door. An unlock symbol illuminates on the door window trim indicating your vehicle is unlocked.

    Lincoln Aviator. Activating Intelligent Access

    read more

     
    Copyright © 2025 www.liaviator2.com