Lincoln Aviator: Principle of Operation / Optional Settings
- You can configure certain vehicle feature
settings when you first create a MyKey. You
can also change the settings afterward with
an admin key.
Note: Not every feature applies to every
vehicle in every market. When they are
available for your vehicle, then they appear
in your information display, providing choices
to switch them on or off, or to select a more
specific setting.
- Various vehicle speed limits so the
MyKey driver cannot exceed certain
speeds. The information display shows
warnings followed by an audible tone
when the MyKey driver reaches the set
speed. You cannot override the set
speed by fully depressing the accelerator
pedal.
WARNING: Do not set MyKey
maximum speed limit to a limit that will
prevent the driver from maintaining a safe
speed considering posted speed limits and
prevailing road conditions. The driver is
always responsible to drive in accordance
with local laws and prevailing conditions.
Failure to do so could result in accident or
injury.
- Various vehicle speed reminders so
MyKey drivers know when their vehicle
speed approaches the limits. Warnings
appear in your information display and a
tone sounds when the MyKey drivers
exceed the set vehicle speed.
- The audio system's maximum volume
limits to 45% so MyKey drivers can
concentrate on the road. A message
appears in the information display when
MyKey drivers attempt to exceed the
limited volume. MyKey also disables the
automatic volume control.
Note: If your
vehicle includes an AM/FM radio or a
very basic audio system, then the radio
may not limit.
- Always on setting. This setting forces
certain features to remain on and active
for MyKey drivers. For example, E911 or
emergency assistance and the do not
disturb features stay on even if a MyKey
driver uses the feature's control to switch
it off. When selected, you will not be able
to turn off Advance Trac or traction
control (if your vehicle has this feature).
Not every vehicle includes the features listed
below. If your vehicle has this equipment,
then you cannot change the following
settings when using a MyKey:
Seatbelt reminder or Belt-Minder™...
Creating a MyKey
Use the touchscreen to create a MyKey:
Insert the key you want to program into
the ignition. If your vehicle has a
push-button start, place the remote
control into the backup slot...
Other information:
System Operation
System Diagram
NOTE:
The system diagrams include all component options. Some components may not be equipped on the vehicle.
Audio System - 10 Speaker System
Item
Description
1
APIM
2
AM/ FM1 Antenna Amplifier
3
Display Unit
4
GWM
5
BCM
6
ACM
7
FCIMB
8
IPC
9
GPS/Satellite Radio Antenna
10
RACM
11
Speakers
12
PCM
13
Audio/SYNC Switches
14
SIMA
15
FM2 Antenna Amplifier
16
SCCM
17
Subwoofer Amplifier and Speaker
Audio System - 14 or 28 Speaker System
Item
Description
1
APIM
2
Display Unit
3
GWM
4
BCM
5
ACM
6
FM2 Antenna Amplifier
7
DSP
8
IPC
9
Satellite/GPS Antenna
10
AM/ FM1 Antenna Amplifier
11
ANC Microphones
12
PCM
13
Speakers
14
SCCM
15
Audio/SYNC Switches
16
SIMA
17
FCIMB
SYNC System
Item
Description
1
Roof Antenna
2
APIM
3
Display Unit
4
Media Hub
5
Microphone
6
ABS Module
7
RCM
8
GWM
9
BCM
10
PCM
11
IPC
12
FCIMB
13
ACM
14
Wi-Fi Device
15
Bluetooth Device
16
DSP
17
ACM
18
Speakers
19
TCU
20
TCU Antenna
21
Wi-Fi Device
22
SCCM
23
Audio/SYNC Switches
24
SIMA
25
GPS/Satellite Radio Antenna
26
Cellular Antenna
Network Message Chart
ACM Network Input Messages
Broadcast Message
Originating Module
Message Purpose
Accelerator pedal position
PCM
Uses the accelerator pedal position percentage for the ANC system operation...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Detach the clips and lower the LH lower steering column trim panel.
Disconnect the headlamp switch electrical connector.
Release the tabs and remove the headlamp switch...