Lincoln Aviator: Appendices
South Korea
R-R-1Ap-WACM2
United States and Canada
WARNING: Changes or modifications
not expressively approved by the party
responsible for compliance could void the
user's authority to operate the equipment...
WARNING: Do not place objects or
mount equipment on or near the airbag
cover, on the side of the front or rear
seatbacks, or in areas that may come into
contact with a deploying airbag...
Other information:
DTC Chart: DDM
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
DTC
Description
Action
B11F6:11
Driver Folding Mirror Motor: Circuit Short To Ground
GO to Pinpoint Test E
B11F6:15
Driver Folding Mirror Motor: Circuit Short To Battery or Open
GO to Pinpoint Test E
B1163:11
Left Mirror Heater Output: Circuit Short To Ground
GO to Pinpoint Test D
B1163:15
Left Mirror Heater Output: Circuit Short To Battery Or Open
GO to Pinpoint Test D
B1C09:11
Driver Left/Right Mirror Motor: Circuit Short To Ground
GO to Pinpoint Test B
B1C09:15
Driver Left/Right Mirror Motor: Circuit Short To Battery Or Open
GO to Pinpoint Test B
B1C10:11
Driver Up/Down Mirror Motor: Circuit Short To Ground
GO to Pinpoint Test C
B1C10:15
Driver Up/Down Mirror Motor: Circuit Short To Battery Or Open
GO to Pinpoint Test C
B1C13:11
Driver Up/Down Mirror Motor Feedback: Circuit Short To Ground
GO to Pinpoint Test C
B1C13:15
Driver Up/Down Mirror Motor Feedback: Circuit Short To Battery Or Open
GO to Pinpoint Test C
B1C14:11
Driver Left/Right Mirror Motor Feedback: Circuit Short To Ground
GO to Pinpoint Test C
B1C14:15
Driver Left/Right Mirror Motor Feedback: Circuit Short To Battery Or Open
GO to Pinpoint Test C
C1B15:11
Sensor Supply Voltage B: Circuit Short To Ground
GO to Pinpoint Test C
C1B15:15
Sensor Supply Voltage B: Circuit Short To Battery or Open
GO to Pinpoint Test C
All other DDM Diagnostic Trouble Codes (DTCs)
-
REFER to: Locks, Latches and Entry Systems (501-14 Handles, Locks, Latches and Entry Systems, Diagnosis and Testing)...
Removal
NOTICE:
During the removal of components, cap, tape or otherwise
appropriately protect all openings to prevent the ingress of dirt or
other contamination. Remove protective materials prior to installation.
NOTE:
Removal steps in this procedure may contain installation details...