Lincoln Aviator: Seatbelt Systems / General Procedures - Seatbelt Cleaning
Cleaning
WARNING:
Do not bleach or re-dye the seatbelt webbing, as the webbing
may weaken. Failure to follow this instruction may increase the risk of
serious personal injury or death in a crash.
-
Refer to the owner's literature for information on
seatbelt care and the recommended cleaning solution to use. Follow the
manufacturer's instructions provided with the cleaning solution.
Inspection
WARNING:
All seatbelt components must be inspected and corrected as
part of any collision repair. Inspect all seatbelt components as
prescribed by Seatbelt Procedure After a Collision found in Section
501-20A General Procedures of this manual...
Other information:
Special Tool(s) /
General Equipment
ROB75240Coolant/Battery Refractometer (Fahrenheit)
Fluid Container
Cooling System Vacuum Tester and Refiller
Draining
NOTICE:
The coolant must be recovered in a suitable, clean container
for reuse...
Removal
NOTE:
LH (left-hand) side shown, RH (right-hand) side similar.
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
The PMI process must begin with the current door
latch control module installed. If the current door latch control module
does not respond to the diagnostic scan tool, the tool may prompt for
As-Built Data as part of the repair...