Lincoln Aviator: Vehicle Care / Cleaning the Instrument Panel and Instrument Cluster Lens
WARNING: Do not use chemical
solvents or strong detergents when
cleaning the steering wheel or instrument
panel to avoid contamination of the airbag
system.
Note: Follow the same procedure as
cleaning leather seats for cleaning leather
instrument panels and leather interior trim
surfaces.
Clean the instrument panel and cluster lens
with a clean, damp and soft cloth, then use
a clean, dry and soft cloth to dry these areas.
- Avoid cleaners or polishes that increase
the gloss of the upper portion of the
instrument panel. The dull finish in this
area helps protect you from undesirable
windshield reflection.
- Do not use any household cleaning
products or glass cleaners as these may
damage the finish of the instrument
panel, interior trim and cluster lens.
- Wash or wipe your hands clean if you
have been in contact with certain
products such as insect repellent and
suntan lotion to avoid possible damage
to the interior painted surfaces.
- Do not allow air fresheners and hand
sanitizers to spill onto interior surfaces.
If a spill occurs, wipe off immediately.
Your warranty may not cover these
damages.
If a staining liquid like coffee or juice has
been spilled on the instrument panel or on
interior trim surfaces:
- Wipe up spilled liquid using a clean, soft
cloth as quickly as possible.
- Use Motorcraft Premium Leather and
Vinyl Cleaner or a commercially available
leather cleaning product for automotive
interiors. Test any cleaner or stain
remover on an inconspicuous area.
- Alternatively, wipe the surface with a
clean, soft cloth and a mild soap and
water solution. Dry the area with a clean,
soft cloth.
- If necessary, apply more soap and water
solution or cleaning product to a clean,
soft cloth and press it onto the soiled
area. Allow this to set at room
temperature for 30 minutes.
- Remove the soaked cloth, then with a
clean, damp cloth, use a rubbing motion
for 60 seconds on the soiled area.
- Dry the area with a clean, soft cloth.
WARNING: Do not use cleaning
solvents, bleach or dye on the vehicle's
seatbelts, as these actions may weaken
the belt webbing.
WARNING: On vehicles equipped
with seat-mounted airbags, do not use
chemical solvents or strong detergents...
Note: Follow the same procedure as
cleaning leather seats for cleaning leather
instrument panels and leather interior trim
surfaces.
For routine cleaning, wipe the surface with
a soft, damp cloth and a mild soap and water
solution...
Other information:
Read all the instructions before using this
product.
Supervise this device when in use around
children.
Do not put fingers into the electric vehicle
connector.
Do not use this product if the flexible
power cord or electric vehicle cable has
broken insulation, or any other signs of
damage...
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Diagnostic Trouble Code Chart
Module
DTC
Description
Action
BCM
B108A:01
Start Button: General Electrical Failure
GO to Pinpoint Test A
BCM
B108A:24
Start Button: Signal Stuck High
GO to Pinpoint Test A
BCM
B1142:29
Ignition Status 1: Signal Invalid
GO to Pinpoint Test A
BCM
B1240:11
Start Button Mode Indicator: Circuit Short to Ground
GO to Pinpoint Test B
BCM
B1240:15
Start Button Mode Indicator: Circuit Short to Battery or Open
GO to Pinpoint Test C
BCM
B1310:12
Run/Start Control: Circuit Short to Battery
GO to Pinpoint Test A
BCM
B1310:14
Run/Start Control: Circuit Short to Ground or Open
GO to Pinpoint Test A
SCCM
B112B:04
SCCM:Steering Wheel Module: System Internal Failure
GO to Pinpoint Test I
SCCM
B112B:44
SCCM:Steering Wheel Module: Data Memory Failure
GO to Pinpoint Test I
SCCM
B112B:45
SCCM:Steering Wheel Module: Program Memory Failure
GO to Pinpoint Test I
SCCM
B112B:46
SCCM:Steering Wheel Module: Calibration / Parameter Memory Failure
GO to Pinpoint Test I
SCCM
B112B:49
SCCM:Steering Wheel Module: Internal Electronic Failure
GO to Pinpoint Test I
SCCM
B135C:11
Heater Element:Circuit Short To Ground
GO to Pinpoint Test G
SCCM
B135C:13
Heater Element:Circuit Open
GO to Pinpoint Test G
SCCM
U0140:00
Lost Communication With Body Control Module: No Sub Type Information
GO to Pinpoint Test H
SCCM
U0140:00
SCCM:Lost Communication With Body Control Module: No Sub Type Information
GO to Pinpoint Test J
SCCM
U0146:00
SCCM:Lost Communication With Gateway "A": No Sub Type Information
GO to Pinpoint Test J
SCCM
U0146:87
SCCM:Lost Communication With Gateway "A": No Sub Type Information
GO to Pinpoint Test J
SCCM
U0155:00
SCCM:Lost Communication With Instrument Panel Cluster Module: No Sub Type Information
GO to Pinpoint Test J
SCCM
U023A:00
SCCM:Lost Communication With Image Processing Module "A": No Sub Type Information
GO to Pinpoint Test J
SCCM
U0241:00
SCCM:Lost Communication With Headlamp Control Module: No Sub Type Information
GO to Pinpoint Test J
SCCM
U210A:11
Temperature Sensor:Circuit Short To Ground
GO to Pinpoint Test G
SCCM
U210A:13
Temperature Sensor:Circuit Open
GO to Pinpoint Test G
SCCM
U3003:A2
Battery Voltage: System Voltage Low
GO to Pinpoint Test E
SCCM
U3003:A3
Battery Voltage:System Voltage High
GO to Pinpoint Test F
SECM
B135C:11
Heater Element:Circuit Short To Ground
GO to Pinpoint Test K
SECM
B135C:15
Heater Element:Circuit Short to Battery or Open
GO to Pinpoint Test K
SECM
B13BD:92
Steering Wheel Heater Module:Performance or Incorrect Operation
GO to Pinpoint Test K
SECM
U1000:00
Solid State Driver Protection Active:No Sub Type Information
GO to Pinpoint Test K
SECM
U210A:02
Temperature Sensor:General Signal Failure
GO to Pinpoint Test K
SECM
U210A:11
Temperature Sensor:Circuit Short to Ground
GO to Pinpoint Test K
SECM
U210A:15
Temperature Sensor:Circuit Short to Battery or Open
GO to Pinpoint Test K
SIMA
U0100:00
Lost Communication With ECM/PCM "A": No Sub Type Information
GO to Pinpoint Test L
SIMA
U0140:00
Lost Communication With Body Control Module: No Sub Type Information
GO to Pinpoint Test L
SIMA
U3003:16
Battery Voltage:Battery Voltage Below Threshold
GO to Pinpoint Test M
SIMA
U3003:17
Battery Voltage:Battery Voltage Above Threshold
GO to Pinpoint Test N
Symptom Charts
Symptom Chart: Ignition Switch - Push Button
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices...
Categories

Use a child restraint (sometimes called an
infant carrier, convertible seat, or toddler
seat) for infants, toddlers and children
weighing 40 lb (18 kg) or less (generally
four-years-old or younger).
Using Lap and Shoulder Belts
WARNING: Do not place a rearward
facing child restraint in front of an active
airbag. Failure to follow this instruction
could result in personal injury or death.
read more