Lincoln Aviator: Electrical / Information and Entertainment Systems
Special Tool(s) /
General Equipment
Interior Trim Remover
Removal
NOTE:
If installing a new module, it is necessary to
upload the module configuration information to the scan tool prior to
removing the module...
Other information:
Initialization
WARNING:
Keep objects and body parts clear of the glass panel when
carrying out the initialization procedure. During the initialization
procedure, the glass panel closes with high force and cannot detect
objects in its path...
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Diagnostic Trouble Code Chart
Module
DTC
Description
Action
IPMB
B129C:08
Left Front Side Sensor: Bus Signal / Message Failure
GO to Pinpoint Test A
IPMB
B129C:96
Left Front Side Sensor: Component Internal Failure
GO to Pinpoint Test E
IPMB
B129C:98
Left Front Side Sensor: Component or System Over Temperature
GO to Pinpoint Test F
IPMB
B129D:08
Right Front Side Sensor: Bus Signal / Message Failure
GO to Pinpoint Test B
IPMB
B129D:96
Right Front Side Sensor: Component Internal Failure
GO to Pinpoint Test E
IPMB
B129D:98
Right Front Side Sensor: Component or System Over Temperature
GO to Pinpoint Test F
IPMB
B13F3:08
Left Rear Side Sensor: Bus Signal / Message Failure
GO to Pinpoint Test C
IPMB
B13F3:96
Left Rear Side Sensor: Component Internal Failure
GO to Pinpoint Test G
IPMB
B13F3:98
Left Rear Side Sensor: Component or System Over Temperature
GO to Pinpoint Test F
IPMB
B13F4:08
Right Rear Side Sensor: Bus Signal / Message Failure
GO to Pinpoint Test D
IPMB
B13F4:96
Right Rear Side Sensor: Component Internal Failure
GO to Pinpoint Test G
IPMB
B13F4:98
Right Rear Side Sensor: Component or System Over Temperature
GO to Pinpoint Test F
Symptom Chart(s)
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices...