Lincoln Aviator: Information and Entertainment Systems / Information and Entertainment System - General Information
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the LH loadspace trim panel.
Refer to: Loadspace Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation)...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
All vehicles
Remove the LH loadspace trim panel.
Refer to: Loadspace Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation)...
Other information:
Special Tool(s) /
General Equipment
Interior Trim Remover
Removal
Remove the front bumper cover.
Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation).
Remove the bluetooth front exterior antenna...
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Diagnostic Trouble Code Chart
Module
DTC
Description
Action
BCM
B109F:01
Intrusion Sensor Module: General Electrical Failure
GO to Pinpoint Test B
BCM
B109F:02
Intrusion Sensor Module: General Signal Failure
GO to Pinpoint Test B
BCM
B109F:08
Intrusion Sensor Module: Bus Signal / Message Failure
GO to Pinpoint Test B
BCM
B109F:49
Intrusion Sensor Module: Internal Electric Failure
GO to Pinpoint Test E
BCM
B109F:55
Intrusion Sensor Module: Not Configured
GO to Pinpoint Test F
BCM
B109F:97
Intrusion Sensor Module: Component or System Operation Obstructed or Blocked
GO to Pinpoint Test B
BCM
B109F:9A
Intrusion Sensor Module: Component or System Operating Conditions
GO to Pinpoint Test B
BCM
B1305:01
Hood Switch: General Electrical Failure
GO to Pinpoint Test D
BCM
B1305:11
Hood Switch: Circuit Short To Ground
GO to Pinpoint Test D
BCM
B1305:15
Hood Switch: Circuit Short To Battery or Open
GO to Pinpoint Test D
Symptom Chart
Symptom Chart: Anti-Theft - Perimeter
Diagnostics
in this manual assume a certain skill level and knowledge of
Ford-specific diagnostic practices...
Categories
Each door has a backup power system which
allows the door to function if your vehicle
has no power. The system has a limited
number of operations before the power is
depleted and turns off. When the system
turns off, the door remains open and
unlatched and does not close.
If your vehicle has no power and the backup
power system is turned off, you can close
and secure your vehicle by manually
resetting each door latch using a key in the
position shown.
read more