Lincoln Aviator: Body and Paint / Front Seats
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Release the clips and remove the IPMA cover.
Disconnect the interior rear view mirror electrical connector...
Overview
Driver Power Seat
The driver power seat is available with a 10, 12 or 30-way power adjustable memory seat.
The driver power seat is controlled by the DSM located on the driver seat track...
Other information:
WARNING: Do not add engine
coolant when the engine is on or the
cooling system is hot. Failure to follow this
instruction could result in personal injury.
WARNING: Do not remove the
coolant reservoir cap when the engine is
on or the cooling system is hot...
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Diagnostic Trouble Code Chart
Module
DTC
Description
Action
DCDC
P0A94:4B
DC/DC Converter "A" Performance: Over Temperature
GO to Pinpoint Test C
DCDC
P0D32:00
DC/DC Converter Over Temperature: No Sub Type Information
GO to Pinpoint Test C
DCDC
P0E56:00
DC/DC Converter Input Voltage Too Low: No Sub Type Information
GO to Pinpoint Test D
DCDC
P0E56:13
DC/DC Converter Input Voltage Too Low: Circuit Open
GO to Pinpoint Test D
DCDC
P0E57:00
DC/DC Converter Input Voltage Too High: No Sub Type Information
GO to Pinpoint Test E
DCDC
U0100:00
Lost Communication With ECM/PCM "A": No Sub Type Information
GO to Pinpoint Test I
DCDC
U0111:00
Lost Communication With Battery Energy Control Module "A": No Sub Type Information
GO to Pinpoint Test J
DCDC
U0412:00
Invalid Data Received From Battery Energy Control Module "A": No Sub Type Information
GO to Pinpoint Test K
DCDC
U3000:04
Control Module: System Internal Failures
GO to Pinpoint Test L
DCDC
U3000:41
Control Module: General Checksum Failure
GO to Pinpoint Test M
DCDC
U3000:42
Control Module: General Memory Failure
GO to Pinpoint Test M
DCDC
U3000:45
Control Module: Program Memory Failure
GO to Pinpoint Test M
DCDC
U3000:49
Control Module: Internal Electronic Failure
GO to Pinpoint Test M
DCDC
U3000:96
Control Module: Component Internal Failure
GO to Pinpoint Test N
DCDC
U3003:16
Battery Voltage: Circuit Voltage Below Threshold
GO to Pinpoint Test F
DCDC
U3003:17
Battery Voltage: Circuit Voltage Above Threshold
GO to Pinpoint Test G
DCDC
U3003:62
Battery Voltage: Signal Compare Failure
GO to Pinpoint Test H
Global Customer Symptom Code (GCSC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices...